Adopting Lithernet Gateway in your Casambi network
We begin this exciting journey by learning how to include the Lithernet Gateway in your Casambi network. This is the first step to start controlling your Casambi networks at another level.
The first thing we need to know, is that we will need the standard Casambi application. We assume that you already have it installed, otherwise, you can do it from the Android or Apple application stores, in any case they are completely free.
If you already have it installed, you just have to click on its icon to enter.
Next, you will see this screen, where you must enter and select your Casambi network, in which you are going to integrate your Lithernet.
In our case, the network is called ‘Adquio’, original, right 😀?
Very good, we have already entered the main Casambi screen. Now we will go to the bottom right ‘More’ button.
| ! | Before continuing, you must power your Lithernet Gateway. You can see how to do it at point ‘Configuring Lithernet Gateway‘ which you will find later. |
Upon entering, you will see a column on the left with the heading name ‘More‘, swipe up until you see an option called ‘Nearby devices‘, click on it.
Now, on the right, you will see a list of devices, among them, you will find one called ‘Ethernet_Gateway_RE‘, that is your Lithernet, click on it.
Doing so will open a menu in which you will see an option ‘Add to’ and your network, click on it.
| ! | Remember, During this adoption process it is very important that your devices, tablet, or phone and your Lithernet Gateway are very close, this will facilitate good communication and faster adoption. |
Once the process is finished, you will see the device as another member of your Casambi network.
And you can see it on the main screen of your Casambi devices as one more.
We are done, we are ready to move on to the next step, it has been easy, right? Congratulations!
