Single probe
Adquio Sensors
Adquio Sensors is a compact device that integrates temperature and humidity probes. It is connected via Modbus RTU and is powered between 12 and 24V. Its main features are: small size and reliability. Up to 64 probes can be configured on the same bus. By default, they are set to 9600 Baud N81, but you can change any of the parameters via Modbus.
All sensors will be calibrated and can be adjusted independently by software.
They are fixed to the wall with 3M double-sided or with screws (not supplied).
Adquio Sensors
TECHNICAL DATA
How to open it
The Adquio Ecosystem probes that use Modbus as connection system have the connections internally, this allows that once installed the box is completely clean and free of cables.
Therefore, in order to be able to connect it, it is necessary to open it, and to do so, you only need to help yourself with a flat screwdriver (no larger than 2.5 mm in diameter) by placing it in the position provided for this purpose, and pull up the top cover.
Internal connections
Adquio Sensors has duplicate wiring connections. This allows for easy bus installation, as you can use one set of connectors as an input, and the other as an output to the next device.
Additionally, the connectors are pressure connectors, you only have to press with the tip of a screwdriver the button that has each terminal, and the cable or tip will enter easily, when you release it will be firmly connected.
These are the values of the connectors:
- Positive terminal power supply from 12 to 24v direct current.
- Negative power supply terminal.
- Pole A or positive of the 485 communication bus.
- Pole B or negative of the communication bus 485.
- Micro-switch block to configure the modbus address of the device.
Modbus address configuration
The table below shows the possible combinations for the Modbus address of your probe. Up to 64 probes can be installed on the same bus.
In the image we show you the first 16, you can see the complete table in the data sheet that you can download below.
Modbus Registers Table
In the attached table you can see the Modbus registers configuration, also available in the product datasheet that you can download below.
Certifications
Safety and Health
EN ISO 13849-1: 2015
EN ISO 13849-2: 2012
EN 62061: 2005 + A1: 2013 + A2: 2015
EN 60950-1: 2006
EN 62311: 2008
EMC
EN 61000-6-4: 2007 + A1: 2011
EN 61000-6-2: 2005
ETSI EN 301 489-1 v2.2.0
ETSI EN 301 489-17 v3.2.0
Related entries…
-
Adquio: each installation, a savings and value generator
Read more: Adquio: each installation, a savings and value generatorInstall in minutes. Manage from your mobile. Save from day one. And all with Adquio.…
-
Adquio Sensors our first Modbus probe
Read more: Adquio Sensors our first Modbus probeToday we introduce you our first Modbus probe Adquio Sensors. On this occasion, it is…
