Expansions and modules

Adquio 8 Analog Inputs

Add eight analogue inputs to collect equipment signals and transmit them through Modbus RTU. Check ranges, connections and registers when preparing the integration.

Adquio 8 Analog Inputs

EXPAND YOUR ANALOGUE INPUTS

Eight more readings to understand your installation

Adquio 8 Analog Inputs adds eight 0–10 V inputs to an Adquio controller or another compatible Modbus RTU master. Collect your sensor signals and bring them into your control variables.

Install the module close to the sensors or expand the measurement channels in your panel using an RS-485 connection.

Adquio 8 Analog Inputs
8Analogue inputs
0–10 VInput signal
RS-485Modbus RTU
24 VDC

More measurement channels in your panel

Add eight analogue inputs when your controller needs to collect more signals. The readings are available through Modbus RTU for programming and integration.

Readings close to the sensors

Collect signals where the equipment is located and connect the module to the controller through RS-485. For 0–20 mA or 4–20 mA signals, add the appropriate adapter.

From analogue signals to useful information

The sensor provides the signal, the module acquires it and the controller makes it available for automation, supervision and analysis.

Probes and sensors

Compatible 0–10 V output sensors for the variables you need to measure.

Adquio 8 Analog Inputs

Adquio 8 Analog Inputs

Acquires up to eight analogue signals and makes them available on the Modbus RTU bus.

Adquio Mini

Adquio controller

Bring the readings into your variables and control logic. Example: Adquio Mini.

Adquio Analytics

Visualisation and analysis

Display the values in control interfaces and use them in dashboards and historical data analysis.

Front connectors and top indicators

Front connectors and top indicators · Adquio 8 Analog Inputs
  1. Power supply 24 V direct current.
  2. Microswitches for Modbus address configuration.
  3. Port 485 protected.
  4. Indicator of successful connection to the master.
  5. Power indicator.

Rear connectors

Rear connectors · Adquio 8 Analog Inputs
  1. 8 Analog inputs for 0 to 10 V.
  2. 2 Ground sockets for reference.

For 0–20 mA or 4–20 mA signals, use the appropriate conversion adapters.

Technical specifications

Power supply

Nominal voltage24 V DC
Consumption15 mA
Maximum consumption20 mA
Maximum supported voltage28 V DC

Communication

Port1 · RS-485 protected slave
ProtocolModbus RTU
Baud rate and framing9600 bps · 8N1
Modbus addressMicroswitches

Analogue inputs

Number of inputs8
Range0–10 V DC
Resolution12 bits
Signal reference2 · GND
Overvoltage protectionYes

Indicators

Status LEDs2 · Power, Online

Mounting and protection

MountingHorizontal · 35 mm DIN rail
Protection ratingIP20
HousingABS UL-94-HB

Environmental conditions

Operating temperature0–60 °C
Storage and transport−40–70 °C
Maximum relative humidity95% · non-condensing

Certifications

Safety and HealthEN ISO 13849-1: 2015
EN ISO 13849-2: 2012
EN 62061: 2005 + A1: 2013 + A2: 2015
EN 60950-1: 2006
EN 62311: 2008
EMCEN 61000-6-4: 2007 + A1: 2011
EN 61000-6-2: 2005
ETSI EN 301 489-1 v2.2.0
ETSI EN 301 489-17 v3.2.0
RoHSEN 50581:2012

Connect your project with the Adquio ecosystem.

Plan your integration with our engineering team and find the right solution for your installation.

Privacy Overview
Adquio

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Analytics

These cookies measure visits and contact enquiries using Google Analytics and Clientify analytics. They are only enabled if you accept them.

Advertising

These cookies enable Google advertising features and measure their performance. They are only enabled if you accept them.