Expansions and modules

Adquio Multi IOs

Bring inputs and outputs together in a Modbus RTU expansion module. Adapt signal acquisition and control commands to each installation zone.

Adquio Multi IOs

INPUTS, OUTPUTS AND MACHINE CONTROL

Bring your machine’s signals together in one module

Connect sensors, PT1000 probes, relays and analogue and digital signals for heat exchangers, chillers, evaporator and condenser units, air handling units and other equipment.

Adquio Multi IOs combines inputs and outputs with Modbus RTU communication, simplifying machine integration and centralising its signals.

Adquio Multi IOs
8AI / DI
4PT1000
5Relays
4DO · 24 V
4AO · 0–10 V
2RS-485

As an expansion module

Connect the RS-485 slave port to an Adquio controller or another compatible Modbus RTU master. The controller reads the inputs and sends commands to the outputs.

With machine-specific programming

For manufacturers and dedicated applications, custom programming can run the machine without a separate programmable controller. A compatible screen or thermostat can connect to the master port for local setpoints, status and manual control. This mode requires a project assessment and specific programming.

Front connectors and top indicators

Front connectors and top indicators · Adquio 18 Relay
  1. Power connection, 24V DC
  2. Microswitches for modbus address configuration.
  3. 485 slave connector with 3 contacts A, B and GND. You use it to control this device from a higher purchase or controller.
  4. 485 master connector with 3 contacts A, B and GND. You use them if you want to connect a control display or thermostat directly to this device. (Designed for cases in which this device is used in a pre-programmed way to perform a very specific function, controlling a machine).
  5. 4 Inputs that can be used as analog and digital, admit a voltage range from 0 to 24 volts, when read as digital, 1 is assumed when passing 4.7V.
  6. 4 pairs of contacts for 4 PT1000 probes.
  7. Error indicator.
  8. Indicator of correct connection with the master.
  9. Power indicator

Rear connectors

Rear connectors · Adquio 18 Relay
  1. 10 contacts for 5 dry contact relays with support up to 10A at 250V.
  2. 4 0-24V digital outputs with power transistors to drive relays.
  3. 4 Inputs that can be used as analog and digital, admit a voltage range from 0 to 24 volts, when read as digital, 1 is assumed when passing 4.8V.
  4. GND connector, ground or negative pole, useful for nearby digital outputs.
  5. 4 0-10V analog outputs.

Technical specifications

Power supply

Supply voltage24 V DC
Consumption130 mA
Maximum supported voltage28 V DC
Start-up peak150 mA

Connectivity

Slave port1 · RS-485 · Modbus RTU
Master port1 · RS-485 · Modbus RTU
Communication speed9600–19200 bps
AddressMicroswitches

Analogue and digital inputs

Configurable inputs8 · AI/DI
Analogue ranges0–10 V / 0–24 V
Digital logic 1> 4.7 V
Resolution12 bits
4–20 mA inputsRequires the DIN-rail converter

PT1000 probes

Temperature inputs4 · PT1000
Resolution15 bits
AdjustmentSoftware-adjustable

Relay outputs

Dry contacts5
Current per contact10 A
Contact voltage250 V AC
DurabilityMore than 100,000 actuations

Digital outputs

Outputs4 · 24 V · power transistors
Maximum load2 A

Analogue outputs

Outputs4 · 0–10 V
Resolution12 bits
Maximum load10 mA

Mounting and operating conditions

MountingHorizontal · DIN 35 mm
ProtectionIP20
Operating temperature0–60 °C
Storage and transport−40–70 °C
Relative humidity≤ 95% · non-condensing
Status LEDs3 · Power, Online, Error

Certifications

Safety and healthEN ISO 13849-1: 2015
EN ISO 13849-2: 2012
EN 62061: 2005 + A1: 2013 + A2: 2015
EN 60950-1: 2006
EN 62311: 2008
EMCEN 61000-6-4: 2007 + A1: 2011
EN 61000-6-2: 2005
ETSI EN 301 489-1 v2.2.0
ETSI EN 301 489-17 v3.2.0
RoHSEN 50581: 2012

From the machine to your control platform

Measurements and status travel to the controller; commands return to the outputs through Modbus RTU.

Field devices

Connect probes, sensors, relays and actuators to the appropriate inputs and outputs.

Adquio Multi IOs

Adquio Multi IOs

The module collects measurements and states, and switches or regulates the connected outputs.

Adquio Mini

Adquio controller

Use a compatible Modbus RTU master, such as Adquio Mini, to coordinate logic, schedules and other building systems.

Adquio Analytics

Control and analysis

Use the controller’s variables for control interfaces, supervision and historical data analysis.

Connect your project with the Adquio ecosystem.

Plan your integration with our engineering team and find the right solution for your installation.

Privacy Overview
Adquio

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Analytics

These cookies measure visits and contact enquiries using Google Analytics and Clientify analytics. They are only enabled if you accept them.

Advertising

These cookies enable Google advertising features and measure their performance. They are only enabled if you accept them.