PT1000 probes
Connect up to eight two-wire PT1000 probes to the module’s two-position connectors.
Expansions and modules
Add eight inputs for two-wire PT1000 probes. Bring temperature measurement closer to your equipment and integrate readings over RS-485 and Modbus RTU.

Simple expansion of temperature probes
Adquio 8 PT1000 is an eight-input module for two-wire PT1000 temperature probes. It communicates readings over RS-485 and Modbus RTU to an Adquio controller or a compatible master, bringing temperature acquisition closer to the measurement points.
| Power supply | 24VDC |
| Consumption | 15mA |
| Port 485 | (Compatible with Modbus RTU 9600 / 19200bps) |
| RTD inputs | 8 · two-wire PT1000 |
| Indicator LEDs | 3; Power, On Line and Error |
| Safety and health | EN ISO 13849-1: 2015 EN ISO 13849-2: 2012 EN 62061: 2005 + A1: 2013 + A2: 2015 EN 60950-1: 2006 EN 62311: 2008 |
|---|---|
| EMC | EN 61000-6-4: 2007 + A1: 2011 EN 61000-6-2: 2005 ETSI EN 301 489-1 v2.2.0 ETSI EN 301 489-17 v3.2.0 |
| RoHS | EN 50581:2012 |
From the physical measurement to control and analysis: follow the temperature data through the installation.
Connect up to eight two-wire PT1000 probes to the module’s two-position connectors.

The module acquires the temperature readings and makes them available over Modbus RTU.
Use an Adquio controller with a Modbus RTU master to bring readings into its variables and control logic. Example: Adquio Mini.
Use the controller’s variables for local controls, supervision, dashboards and historical data.
Supply the module with 24 V DC, connect its protected RS-485 port to the Modbus RTU master and set the address and communication speed before checking the readings.
Plan your integration with our engineering team and find the right solution for your installation.